Products

Cables: SL Series Fiberoptic Cable MT Series Fiberoptic Cable Breakout Industrial Cables Distribution Industrial Cables
Patchcords
Patch Panels: Wall Mount Wall Mount IP55 Rack Mount Panel Accessories

News & Events

Ilsintech Establish its Distribution Channel with Masstron in Singapore
Ilsintech announced its partnership with Masstron Pte Ltd to distribute Ilsintech's splicing machine.

JDSU New Product Update
Masstron will organising a product update session for JDSU's new series of OTDR and loss tester.

Cables

Teldor Cables & Systems Ltd

SL Series Compact Loose Central Tube Fiberoptic Cable

Cable Description

The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the cable contains more then 12 fibers, they are divided in two groups. A colored thread identifies each group, Physical protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube.

A wide range of jacket options is available: UV-stabilized PVC, halogen-free flame-retardant material, polyethylene with corrugated anti-rodent steel armoring, a jacket incorporating a sealed aluminum tape, and more. A ripcord is located under the jacket to facilitate jacket removal.

Applications

- Both indoor and outdoor
- Ducts, aerial installations and direct burial (armored option)
- Distribution and general purpose cables

Benefits

- Small diameter and lightweight
- Cost effective
- Wide operating temperature range
- Wide range of jacket options

Standards

- Cables tested according to TIA/EIA-455 and IEC-60794-1-2
- Cables meet or exceed Telcordia (Bellcore) requirements for outside plant cables (GR-20) when the appropriate options are chosen
- Cables ordered with HFFR jackets meet IEC-60332-1 standard
- On request cables meeting the IEC-60332-3 can be supplied

SL-Series Fiberoptic Cables Typical Mechanical Properties
Maximum Pulling Load	1500 N or the equivalent of the cable weight per km, whichever is higher
Maximum Operating Load	60% of the Maximum Pulling Load
Maximum Compressive Load	For all SLA cables: 3000 N For all SLB cables: 4000 N
Repeated Impact	4.4 N.m (J) 3 x 2 impacts
Minimum Bending Radius for Installation	20 times the cable Outer Diameter (O.D.)
Minimum Long Term Bending Radius	20 times the cable O.D. for armoured cables 10 times the cable O.D. for non-armored cables
Twist (Torsion) - Length	180°x10 times, 125 times the cable O.D.
Cyclic Flexing	25 cycles for armored cables 100 cycles for non-armored cables
Operating Temperature Range	-20°C to +70°C (With PE jacket)
Storage Temperature Range	-40°C to +70°C (With PE jacket)

**These specifications are subject to change without prior notification.